The Repair and Maintenance of Electronic Platform Scale

After the installation of the electronic platform scale, the later maintenance is also very important. Through correct maintenance and care, the service life of the platform scale can be maximized. How to maintain the electronic platform scale?

 

1. Timely remove the scattered objects on the platform scale, garbage, fallen leaves and other sundries under the platform scale.

2. It is forbidden to make emergency braking or park the vehicle for a long time on the platform scale platform.

3. It is prohibited for non weighed vehicles to pass on the pounds.

4. It is strictly forbidden to do any work on the weighing platform that may cause the scale to vibrate.

5. platform scale pressure gauge is an electrostatic sensing device. It is strictly prohibited to conduct electric welding or other electrical operations on the scale platform.

6. In order to ensure the accuracy of platform scale measurement, according to the requirements of the national metro logical supervision, the metro logical department is regularly invited to inspect and verify the platform scale.

7. Frequently check whether the limit clearance of the electronic platform scale is reasonable, and the limit shall not collide with the electronic platform scale body

8. The platform scale body shall be provided with good drainage facilities, and the junction box shall not be immersed in water to prevent the indication of the weighing instrument from drifting.

9. The resistance value of the internal bridge circuit of the electronic platform scale weighing sensor is very small. If it is not handled properly, a very small current may cause damage to the weighing sensor. The load cell has a certain overload capacity, but the overload of the scale body should be prevented during the weighing process of the electronic platform scale. It should be noted that the overload in a short time may also cause damage to the load cell.

10. If the weighing display controller cannot be used for a long time (such as more than one month), power on inspection shall be carried out according to the environmental conditions to avoid being affected by moisture or other harmful gases

11. The foreign matters in the gap around the electronic platform scale need to be cleaned, and other things are not allowed to exist in the gap.

12. Clean the weighing platform frequently to keep it clean.

13. The connector shall be maintained every half a year, and the bearing head shall be smeared with grease after cleaning.

14. Frequently check whether the wiring is loose and broken, and whether the grounding wire is secure

15. It is strictly forbidden to conduct electric welding on the electronic truck scale platform or use the scale platform as the ground wire.

16. There should be no ponding in the foundation pit. If there is ponding in the foundation pit due to rainstorm and other reasons, the drainage channel should be immediately removed or dredged with a water pump, and the instrument can be powered on after taking drying measures.

17. The weight of the weighing vehicle shall not exceed the maximum weight of the electronic platform scale.


Post time: Sep-14-2022